Home | Site Map | Net How To | Net Issues | Cisco How To | Articles | Forums | Services | Setup Guide | Careers | About Us | Contact Us|

 

Requirements of Windows Mobile Emulator

You need to download the following components depending on your needs.

Windows Mobile 5.0 Emulator
http://www.microsoft.com/downloads/details.aspx?FamilyID=c62d54a5-183a-4a1e-a7e2-cc500ed1f19a&DisplayLang=en
You need both the emulator itself and the MSFP image files.

Windows Mobile 6 Emulator

http://www.microsoft.com/downloads/details.aspx?FamilyID=38c46aa8-1dd7-426f-a913-4f370a65a582&DisplayLang=en
To use the Windows Mobile 6 images you will need v2 of the emulator, which is also compatible with Vista. You will need the above link for the device images and then download the new emulator:

http://www.microsoft.com/downloads/details.aspx?FamilyID=dd567053-f231-4a64-a648-fea5e7061303&displaylang=en 

Or Visual Studio 2005

Network Driver
http://www.microsoft.com/downloads/details.aspx?FamilyID=dc8332d6-565f-4a57-be8c-1d4718d3af65&displaylang=en

Or Virtual PC 2004 and Virtual Server 2005 or above

Active Sync
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx 

Post your questions, comments, feedbacks and suggestions

Related Topics

Configure Microsoft ActiveSync

1) Enable DMA

2) Run Microsoft ActiveSync

3) Add Server Source

4) Enter Server Address

5) Enter User's Information

6) Choose the data to synchronize

7) Check the Status

8) Troubleshooting

How to setup Mobile 6 ActiveSync using Emulator

 

 

  This web is provided "AS IS" with no warranties.
Copyright 2002-2015 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.