Home | Site Map | Net How To | Net Issues | Cisco How To | Articles | Forums | Services | Setup Guide | Careers | About Us | Contact Us|

 

How to setup Wireless router as a switch

How to setup Linksys WRPT54G Wireless Router as swicth

How to setup D-Link DIR-615 Wireless Router as switch


How to setup D-Link DIR-615 Wireless Router as switch

1. Login D-Link Wireless Router.
2. Navigate to Setup>Internet>WAN.
3. Make sure the Internet connection type is DHCP.
4. In the Network settings, setup the Router IP and subnet.
5. Now connect all connections to LAN ports and no connection should go to the WAN port.

How to setup Linksys WRPT54G Wireless Router as swicth

For easy managing your home or small network, you may want to setup a wireless router as switch so that the wired and wireless computers are in the same subnet. This configuration is based on Linksys WRPT54G Wireless Router.

1. Connect the wireless router WAN port to the LAN switch or the LAN router.

2. Open Setup>Basic.

3. In the Internet setup, select Static IP. Assign the LAN IP, subnet, DNS and default gateway. Note: you can choice Obtain IP Atomically too.

4. In Network setup, assign different LAN IP with the same subnet, default gateway and DNS.

5. Save the settings. Now, renew your wireless computer IP by using ipconfig /renew. You should have the new IP which is the same wired LAN IP.

Related Topics

  This web is provided "AS IS" with no warranties.
Copyright 2002-2015 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.